Most common
problems & fixes

Is your AEG FAVORIT 40660 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

Dishwashing cycle does not start

The mains plug is not plugged in or a fuse in the house’s wiring system is defective.

Plug in the mains plug or replace the defective fuse.

Water inlet problems

The tap is blocked or furred with lime-scale, or the tap is turned off.

Clean the tap and turn it on. If present, clean the filter in the threaded hose fitting.

Dishwashing cycle indication lights are flashing

The anti-flood system has been triggered.

Turn off the tap and contact the Service Force Centre.

Dishwasher is noisy

A whistling noise can be heard when washing dishes.

Decalcify the appliance with commercially available agents for cleaning dishwashers.

View all problems & fixes

Quick setup

Follow these easy steps to get your AEG FAVORIT 40660 Dishwasher up and running in no time.

1

Check for Damage

Before using the dishwasher for the first time, check for any damage caused during transport. Do not connect a damaged appliance. Contact your supplier if there is any damage.

2

Electrical Connection

Ensure all electrical work required for the installation is carried out by a qualified electrician. The appliance must be earthed.

3

Water Connection

Connect the dishwasher to the water supply, which can be either cold or hot water up to a maximum of 60°C.

View the rest of the steps

EU Directive Conformity

The AEG FAVORIT 40660 proudly conforms with a whole lineup of EU Directives! It's like a badge of honor, showing off its compliance with safety and efficiency standards. Your dishes are in regulation-savvy hands!

Capacity Champs

With the ability to handle 12 place settings at once, the AEG FAVORIT 40660 is like the superhero of dinner parties. It cleans up after a feast faster than you can say 'dishwasher'.

Troubleshooting

The AEG FAVORIT 40660 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

Water Inlet Problems

The programme indicator for the selected dishwashing cycle is flashing, and the end cycle indicator flashes with 1 short light signal with approx. 3 seconds pause in-between. This indicates problems with water inlet. The tap is blocked or furred with lime-scale. Clean the sink spigot outlet. Check the water drain hose installation. Ensure the tap is turned on and clean any filters present in the hose fitting.

Anti-flood System Triggered

The end of the cycle indicator is flashing in sequence with 3 short light signals one after another. This indicates that the anti-flood system has been triggered. Check hose installation and ensure it is correctly positioned. If the problem persists, contact the Service Force Centre.

Sink Spigot Connection Blocked

The programme indicator for the selected dishwashing cycle is flashing, and the end cycle indicator flashes with 2 short light signals one after another. The sink spigot connection is blocked. Clean the sink spigot outlet and check the hose installation. Cancel the cycle and restart after rectifying the blockage.

More Troubleshooting

Model Overview

The AEG FAVORIT 40660 is a freestanding dishwasher designed to accommodate 12 place settings, including serving dishes. It operates within a permissible water pressure range of 1-10 bar, and requires an electrical connection of 230 V, 13 A.

Safety Instructions

To ensure safety, it is crucial to handle the plug and cable with care, disposing of them properly if they need to be cut off. Additionally, the appliance must be earthed, and any electrical work should be completed by a qualified electrician.

Operation and Usage

To operate, press the ON/OFF button. The control panel features program buttons for selecting the desired dishwashing cycle, and function buttons for setting additional functions. The dishwasher automatically pumps out remaining water to prevent overflow.

Maintenance and Faults

For small malfunctions, consult the indicators on the control panel and refer to the troubleshooting table to remedy faults. Service work should only be performed by authorized personnel.

Dimensions and Weight

The dishwasher measures 850 mm in height, 598 mm in width, and 598 mm in depth, with a maximum weight of 54 kg.

Connecting the Dishwasher

The water inlet hose, drain hose, and mains cable must be connected on the side of the dishwasher, as there is no space behind the appliance. The dishwasher can be connected to cold and hot water supplies up to a maximum of 60°C.

Installation and Transportation

The dishwasher should only be transported upright to prevent salt water leakage. Permanent electrical connections must be installed by trained electricians.

Environmental Considerations

Packaging materials are recyclable. At the end of the appliance's life, remove the plug from the socket and consult local waste services for recycling information.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Regular Cleaning

Ensure that the filters are regularly checked and cleaned. Dirty filters can spoil wash results. Open the door, remove the lower basket, turn the handle about a quarter turn anticlockwise to remove the filter system, and clean it thoroughly under running water.

Avoid Aggressive Cleaners

Do not use furniture care products or aggressive cleaners on the dishwasher. Clean the controls with a soft cloth only when necessary.

Check Internal Components

Occasionally inspect the internal dispensers, door seal, and water inlet filter for dirt and clean them as needed. This helps maintain the appliance's efficiency.

Preventive Measures Against Frost

If the dishwasher is located in a room where frost may occur, ensure to remove the connection hose from the tap after each use to prevent freezing and potential damage.

Handle the Door with Care

Never sit or stand on the open door to prevent damage. Always handle with care to maintain the appliance's integrity.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

General Specifications

  • Model: FAVORIT 40660
  • Type: Dishwasher
  • Installation: Free-standing

Technical Details

  • Capacity: 12 place settings
  • Dimensions (H x W x D): 850 x 598 x 598 mm
  • Weight: 54 kg
  • Electrical Connection: 230 V, 13 A
  • Total Output: 2250 W
  • Permitted Water Pressure: 1-10 bar (0.1-1.0 MPa)

Compliance

  • Low Voltage Directive: 73/23/EEC
  • EMC Directive: 89/336/EEC
  • CE Marking Directive: 93/68/EEC

AEG FAVORIT 40660: An Efficient Dishwasher for Modern Kitchens

The AEG FAVORIT 40660 is a sleek, free-standing dishwasher designed to meet the demands of contemporary households. With a capacity to handle 12 place settings, this appliance is perfect for families or those who love to entertain. Its robust build, featuring dimensions of 850 x 598 x 598 mm, ensures it fits comfortably into most kitchen spaces while delivering a powerful performance with a total output of 2250 W. This model operates efficiently on a 230 V electrical connection and supports water pressures ranging from 1 to 10 bar, making it versatile for various plumbing setups. The FAVORIT 40660 comes equipped with multiple features like adjustable spray arms and a water softener unit, enhancing its cleaning efficiency. Its user-friendly interface allows you to select various dishwashing cycles tailored to different levels of soiling, ensuring your dishes come out sparkling clean every time. With a design that prioritizes safety and efficiency, the AEG FAVORIT 40660 stands out as a reliable addition to any kitchen, backed by AEG's commitment to quality and innovation.